Elitech RC-5 Bedienungsanleitung Seite 4

Operation
1. Battery Activation
(1) Turn the battery covercounterclockwise to open it
(2) Gently pressthe battery to hold it in position, then pull out the battery insulator strip
(3) Turn the battery cover clockwise and tighten it.
2. Install Software
Please download and install the free ElitechLog software (macOSand Windows) from Elitech
US: www.elitechustore.com/pages/download
or Elitech BRI www
3. Configure Parameters
First, connect the data logger to the computer via USB cable, wait until
LCD; then configure via:
ElitechLog Software:
- If you do not need to changethe default parameters (in Appendix); please click Quick Reset
under Summary menu to synchronize local time before usage;
f you need to change the parameters, please click the Parameter menu, enter your preferred
values, and click the Save Parameter button to complete the configuration
Warning! For first time user or after battery replacement:
To avoid time or time zone errors,pleasemoke sure you clickQuick Reset or Save Parameter
before usageto syncond configureyour local time into the logger.
elitechbrasil com.br.
or Elitech I-JK:www elitechonline.co.uk/software
3
icon shows on the
EN