ProBreeze PB-17-UK Bedienungsanleitung Seite 5

SWITCHING ADAPTERS
WARNING: DO NOT HANDLE THE ADAPTER
OFF AND NOT CONNECTED TO ANY POWER
Note: Always ensure you are using the correct removable
To change the removable panel on your appliance, please follow the below steps:
To remove the current removable panel, push down on the button to the bottom-left
removable panel. Turn the removable panel anti-clockwise
off.
2. To insert the new removable panel, fit the grooves on the back into the prongs on the
adapter body. Turn clockwise to click it into place.
OPERATING INSTRUCTIONS
To turn on your dehumidifier, connect it to the adapter, plug it into a wall socket and press
the power button.
Press the power button again to turn off the dehumidifier.
Note: When the water tank is full, the light on your dehumidifier
dehumidifying. Press the power button to turn off the dehumidifier.
empty it and replace it in its original position.
Note: Your adapter may heat up to 700C while the appliance
Note: Your dehumidifier performs best between 20-300C and 60-80% humidity.
Setting the Timer:
To set a timer for how long the appliance should stay on for, follow the below instructions:
To set a timer for up to four hours,hold down the light/timer button for three seconds.
The timer indicator light will turn on when the timer has been set.
To cancel the timer, hold down the light/timer button for three seconds.
The timer indicator light will turn off when the timer has been cancelled.
Changing the Light Colour:
Pressthe light/timer button and the dehumidifier will begin to cycle through the light colour
options.
Pressthe light/timer button to select a colour.
To turn off the light, pressthe light/timer button again.
8 of 60 | English
WITH WET HANDS. ENSURE THE DEVICE IS TURNED
SOURCE BEFORE SWITCHING ADAPTERS.
panel for your region.
into the 'OPEN' position and lift
will turn red and it will stop
Remove the water tank,
is running.
CLEANING & STORAGE
A WARNING: ALWAYS TURN THE APPLIANCE
THE POWER
HANDLING OR CLEANING
A CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR
CREATE A FIRE AND/OR ELECTRICAL H AZARD.
of the
A CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS,
Do not attempt
than that detailed
Clean the exterior surface of the appliance
it with a soft, damp cloth. Dry the appliance
clean cloth.
Always empty the water tank, clean and dry the
appliance when not in use to prevent mould.
Cleaning the water tank:
Remove and empty the water tank as per the instructions
above.
Clean the water tank with warm tap water and mild
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
Ensure to remove any scale or deposits that have formed
inside the water
Wipe all surfaces dry before placing the water tank back
into the appliance.
Storage:
To store your product, we recommend
or a similar-sized
Store the appliance
CORD FROM THE ELECTRICAL
IT.
OF THE APPLIANCE,
AS THIS CAN DAMAGE THE APPLIANCE.
to clean the appliance
by the manufacturer.
tank.
box.
in a safe, clean and dry place, away
OFF AND UNPLUG
OUTLET BEFORE
AS THIS COULD
in any other way
by wiping
with a soft,
using the original
English | 9 of 60