Basic Operations; Turning The Display On Or Off - Benq Rp6504 Bedienungsanleitung

Basic operations

Turning the display on or off

1. Be sure to follow the instruction of
2. At the back of the display, flip on the power switch located on the lower left side to On. The
system will enter standby mode.
• To turn on the display, press the power button on the control panel or on the remote control.
• To turn off the display, press the power button on the control panel. The system will
automatically enter standby mode.
Signal receiver
The display's standby mode still consumes power. To completely cut off power supply, set the power switch
to OFF (O) and then disconnect the power cord from the power outlet.
Connecting power on page
Power button
18
14.