Installing A Camera Mount - Benq Rp6504 Bedienungsanleitung

Installing a camera mount

Check the mounting component list before installing:
Upper mount
To install the camera mount:
Lower mount
1. Place your camera onto the upper mount
2. Install the lower mount with two M3x5mm
3. Insert your camera with the upper mount
4. Secure the camera mount by screwing a
7
1/4" screw (8mm)
and secure the camera by screwing the 1/4"
screw into the camera's screw hole.
screws and secure it on the top of the
display.
attached into the lower mount.
M3x5mm screw into the screw hole at the
left side of the upper mount.
M3x5 mm screw x 3