Assembly Drawing - Ventmatika Rcw Bedienungsanleitung

LT RU
III. II
Surface mounting, opening is prepared at the wall for the connection cable d13 and two holes for installation
of the box bottom.
43
43
Attach the box bottom cover to the wall leaving approx. 3 cm of cable from the surface. Put the battery to the
socket at the board, polarity "+" outwards, connect the plug to the board and close the box cover (see the draw-
ing) by attaching the left side (1–2) and then gently press the right side (3). Connect the other cable plug to the
socket of the recuperator (RC485_1).
IV.
Control panel RCW
Battery, 2032 type
Communication cable RJ11 to He1402 (4 strands), 13 meters 1 piece
22
Downloaded from www.Manualslib.com
EN DE FR
Mounting
d13
30
86
Mounting drawing
Contents
manuals search engine
d4
30
1 piece
1 piece
2 2 1 1

Assembly drawing

www.ventmatika.com
3 3