Ventmatika RCW Bedienungsanleitung Seite 16

LT RU
Description
The "RCW" control panel is used for control of ventilation units with
V1, V2 boards.
• Program the unit operation modes for one week.
• Set the temperature for supply or extracted air fl ow.
• Set fan motor rotation speed.
• Indication for the plate heat exchanger's antifreeze protection.
• Alarm indication.
• Indication of the temperatures, humidity and pressure for ambient,
room, exhaust and supply air.
• Automatic recognition of the controlled unit.
• Surface mounting.
Technical Te
Mounting
Voltage
Data transmission
Dimensions (WxHxD)
Safety class
Ambient temperature
Ambient humidity
Panel weight
*Possible loss of contrast of the LCD display
Functionality
1 "Fast button" – used for control of the selected function (see II.6.5.3)
2 – used for increasing the setting values or for moving a line up
3 "OK" – used for confi rmation of the selected line or of the set value
4 – used for decreasing the setting values or for moving a line down
I. Initial
1.
Unit Uni operation
"OFF", "Manual" or "Operation schedule"
"OFF" – complete switch off of the unit
"Manual" – the unit operates based on the set speed and tempera-
ture
"Operation schedule" – the unit operates based on the programmed
events.
If no programmed events exists, "( ! )" is shown (see II.2)
16
Downloaded from www.Manualslib.com
EN DE FR
data ta
[VDC]
[mm]
of of butto tons
window w
mode is s s selected
manuals search engine
Surface
15-30
RS485
86x86x16
IP-20
[°C] 10-30(50*)
[%] <90
[g] 63
OK
1 2 3
Manual
Fan speed Schedules ( ! )
Set temperature Manual
Supply air temp. OFF
Deicing
7:28 2013-06-04
www.ventmatika.com
4
Sk