Cricut joy JCTR101 Bedienungsanleitung Seite 3

Get to know your Cricut Joy
1 Tool Clamp
2 Material Guides
3 Indicator Light
Indicator Lights
Solid Ready to use
50% brightness Idle
Slow pulse Searching for
Bluetooth connection
®
Fast pulse Update in progress
Flash See Cricut app for directions
Red Error
Off No power source
Included
• Cricut Joy Cutting Machine
• Blade + Housing
• Fine-Point Pen (0.4 mm)
• StandardGrip Mat, 4.5 in x 6.5 in
(11.4 cm x 16.5 cm)
• Welcome Card
• Power Adapter
• Free Trial Membership to Cricut Access
™
(New subscribers only)
• 50 ready-ro-make projects online
• Materials for a practice cut
4
™
3
1
2
2
How to power on
Before operating machine, read enclosed
Important Safety Instructions
• Connect included power adaptor to machine.
• Make sure to only plug other end into
compatible wall outlet.
• Connect machine to compatible device via
Bluetooth.
• Activate your machine at cricut.com/setup
Use caution, and follow instructions when
replacing blade. For instructions, see blade
packaging or help.cricut.com/blades
How to change tool
1. Open Tool Clamp (1) 2. Seat tool.
and remove tool.
How to load machine mat with material
1. Remove protective clear cover. 2. From top-left corner, align
material onto mat.
How to load
Smart Materials
™
When prompted, position Smart
Material under Material Guides (2).
3. Close clamp.
3. When prompted, insert mat
under Material Guides (2).
Every project is unique.
For more help resources, see
help.cricut.com
• Get free expert-led Cricut courses &
workshops on demand at learn.cricut.com
• Join other Cricut Community members in
our Offi cial Cricut Facebook group.
EN
5