Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.1.
Device description
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3.
Device use
Combine the bottle with the matching cap and place the bottom of the bottle on the rubber
•
mould.
•
Press the handle so that the bottle and cap are within the pressing range of the rotary mould.
Press the Start / Stop button.
•
Repeat the above steps to seal more bottles.
•
EN
1 – Handle
2 – Rubber mould
Werbung
