insta360 GO 3 Gebrauchsanleitung Seite 4

1. Before use, insert a microSD card into the Quick Reader.
2. Push out the USB Type-C or Lightning Connector, then
push the button on the Quick Reader to keep it exposed. Plug
the Quick Reader into a power adapter, or the Action Pod. (If
using the Action Pod, press its power button to power it on.)
3. Press the camera's button for 3 seconds to power it on,
then attach it to the Quick Reader. The camera's indicator will turn green once it is
successfully connected.
Button
4. Click the camera button, the camera beeps and the indicator blinks green,
this will start the transfer of files to the microSD card and charge the camera.
When the camera beeps three times, the indicator stays green, signalling that the
transfer has completed.
Notes:
• Ensure the microSD card is in the Quick Reader before transfering files.
• If the Quick Reader is inserted in the Action Pod, the Action Pod should be
powered on to backup files.
2