Safety Precautions For Projectile Hazards; Safety Precautions In The Event Of A Trapping Hazard; Safety Instructions For Operating Hazards - Stier 14-Kbs Originalbetriebsanleitung

EN Original User Guide
the switch is in the "OFF" position when you
connect the device to the compressed-air supply.
• Avoid unsafe situations or positions, especially
when you are tired.
• Tools operated with compressed air can vibrate
when used. Vibrations, repetitive movements, or
awkward positions can be harmful to your hands
or arms. Stop using a tool if you experience
discomfort, tingling or pain. Consult a doctor
before resuming work.
• Read and understand the safety instructions
before installing, operating, repairing, performing
maintenance on, changing accessories, or working
in the vicinity of the pneumatic assembly tool for
threaded joints. Failure to do so may result in
serious injury.
4.2

Safety precautions for projectile hazards

• Failure of the workpiece, accessories, or even the
tool used itself can create high-speed projectiles.
• Always wear impact-resistant eye protection while
operating the pneumatic assembly tool for
4.3

Safety precautions in the event of a trapping hazard

• There is a risk of trapping, suffocation, scalping
and/or cuts if loose clothing, personal jewellery,
items worn around the neck, hair or gloves are not
kept away from the tool and accessories.
• Gloves can get caught in the rotating drive and
lead to severed or broken fingers.
4.4

Safety instructions for operating hazards

• When using the tool, the operator's hands may be
exposed to hazards such as crushing, impact, cuts
and abrasions, and heat. Wear appropriate gloves
to protect your hands.
• Operators and maintenance personnel must be
physically able to handle the weight and power of
the tool.
• Guide the tool safely: be prepared to counteract
normal or sudden movements and have both your
hands at your disposal.
• Ensure you have a balanced posture and a secure
footing.
• If the energy supply is interrupted, trigger the
start/stop system.
• Use only the appropriate lubricant.
STIER Industrial GmbH
• Only qualified and trained operators should install,
adjust or use the pneumatic assembly tool for
threaded bolts.
• Do not modify this pneumatic assembly tool for
threaded bolts. Modifications can reduce the
effectiveness of the safety measures and increase
risks for the operator.
• Do not use the pneumatic assembly tool for
threaded bolts if it is damaged.
• The tools must be checked regularly to ensure that
the nominal values and markings required in this
part of EN ISO 11148 are clearly legible on the tool.
If necessary, the employer/user must contact the
manufacturer to
identification labels.
threaded joints. The required degree of protection
must be assessed for each application.
• Make sure that the workpiece is securely fixed .
• Rotating plug-in nipples, drive sockets and drive
extensions can get caught in rubber-coated or metal-
reinforced gloves.
• Do not wear loose gloves or gloves with cut or frayed
fingers.
• Never hold the drive, socket, plug-in nipple or the
drive extension.
• Keep your hands away from rotating drives.
• Do not use the device in confined spaces and pay
attention to the hands getting crushed between the
tool and the workpiece, especially when unscrewing
18
obtain replacement
EN