Select Forward And Reverse Rotation; Scaling The Shaft - Eberth Pt1-R760 Bedienungsanleitung

3.1.3. Select forward and reverse rotation

The device has a switch that can be used to set the direction of rotation. Press the L button for forward
rotation and the R button for reverse rotation.
Note: The reverse rotation is only used to release the flexible shaft in the clamped state (Fig. 3).
Figure 3

3.1.4. Scaling the shaft

1. Press the forward/reverse button to position L.
2. Press the trigger lightly and move the front handle to
the F position. The wave pushes forward.
3. Press the trigger lightly and move the handle to the R
position to move the shaft further backwards.
4. When the forward or reverse rotation knob is at R, the
shaft moves in the other direction.
5. If the handle is in the neutral position O, the shaft will
not be cut regardless of the position of the knob.
Figure 6
EN
Figure 4
Figure 5
5