Triton TWX7 Sicherheits- Und Bedienungsanleitung Seite 2

Introduction
Thank you for purchasing this Triton product. This manual contains
information necessary for safe and effective operation of this
product. This product has unique features and, even if you are
familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all
users of the product read and fully understand this manual. Keep
these instructions with the product for future reference.
Description of Symbols
The rating plate on your product may show symbols. These
represent important information about the product or instructions
on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Toxic fumes or gases!
Be aware of kickback!
WARNING: Sharp blades or teeth!
Indoor use only!
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut
injuries.
EN
DO NOT touch! DO NOT access the guard without
removing the power. Keep children and bystanders away
while operating a power tool. Distractions can cause you
to lose control. All visitors should be kept safe distance
from work area.
2
Original Instructions
Technical Abbreviations Key
V
~
d.c.
A, mA
n
0
n
°
Ø
Hz
W, kW
min
-1
dB(A)
m/s
2
Specification
Part no:
Compatible routers:
Router module size:
Workcentre table size:
Extruded fence size:
Extruded fence thickness:
MDF fence face size (x 2):
Max MDF fence face opening:
Fence adjustable position:
Fence micro adjusters:
Always disconnect from the power supply when
adjusting, changing accessories, cleaning, carrying out
maintenance and when not in use!
Volts
Alternating current
Direct current
Ampere, milli-Amp
No load speed
Rated speed
Degrees
Diameter
Hertz
Watt, kilowatt
Operations per minute
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
TWX7RT001
Triton TRA001
Triton TRA002
Triton TFBR001
Triton MOF001
Triton JOF001
660 x 410mm / 26" x 16-1/8"
904 x 708mm / 35-9/16" x 28"
680 x 85mm / 26-3/4" x 3-3/8"
21.4mm / 7/8"
340 x 75mm / 13-3/8 x 3"
90mm / 3-1/2"
+25 / -125mm / +1" / -5"
1mm / 3/64" (one full
revolution)