HyperX QuadCast 2 Schnellstartanleitung Seite 9

HyperX NGENUITY Software
For software support and firmware updates, download the HyperX
NGENUITY software at: hyperx.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team or see user manual at:
hyperx.com/support
ENGLISH
Overview
A - Tap-to-Mute Sensor
B - LED ring
C - Multifunction control
D - 3.5mm headphone port
Connecting Microphone
Connecting Headphones
Sélection du diagramme polaire
APPUI PENDANT 5 SECONDES
LED SOUND
RING DIRECTION
E - USB-C port
F - USB-C to USB-C cable
G - USB-C to USB-A adapter
POLOR
PATTERN
Cardioid
Omnidirectional
Stereo
Bidirectional
Multifunction Control
Press the multifunction to cycle between adjustment modes, shown by the
and LED's. The multifunction control's LED ring will indicate the setting of
the currently selected mode.
Adjusting Microphone Gain
Adjusting Playback Volume
Adjusting Microphone Monitoring Level
Muting the Microphone
Tap the top of the microphone to mute/unmute the microphone. The microphone
status LED will indicate the current mute status
Positioning Microphone
QuadCast 2 should be placed with the front of the microphone facing the sound
source.
Removing and Attaching Microphone to Shock Mount
Attaching to Other Arms or Stands
QuadCast 2 can be removed from its stand and used with microphone mounts with
either 3/8" or 5/8" threads.
* HyperX Caster Not Included
HyperX NGENUITY Software
For software support and rmware updates, download the HyperX NGENUITY
software at: hyperx.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team or see user manual at: hyperx.com/support
FRANÇAIS
Présentation
A - Capteur tactile Coupure audio
B - Voyant LED
C - Bouton Marche/Arrêt
D - Port casque 3,5 mm
Connexion du micro
Connexion du casque
Sélection du diagramme polaire
APPUI PENDANT 5 SECONDES
E - Port USB-C
F - Câble USB-C vers USB-C
G - Adaptateur USB-C vers USB-A