Lentz RFC-1911 Bedienungsanleitung Seite 12

MAINTENANCE
The hair clipper requires regular lubrication
of its blades to ensure proper and continuous
operation.
• After cleaning, put 1 drop of lubricating oil
on the blade, switch on the device to dis-
tribute the oil, and then remove surplus
oil with a cloth.
• To avoid completely using up the battery,
continuously charge it for approximately
1.5 hours, but no longer than 24 hours.
Otherwise, it may affect the battery's
service life.
CLEANING
The device requires regular cleaning.
• Disconnect the device from the power
source. The housing can be wiped with a
slightly wet cloth.
• Do not use chemically active or abrasive
detergents to clean the device, because
that can damage its surface. The adapter
can also be wiped with a slightly wet cloth:
it should be unplugged while you do that.
• The detachable parts of the device should
be washed in warm soapy water.
• The blades should be cleaned from hair
with the supplied brush. Additionally, the
blade unit should be removed from time
to time for cleaning.
• Do not clean the hair clipper using tools.
• Never submerge the device in water or
other liquid.
12
EN
CONFORMITY WITH DIRECTIVES
This product is CE marked to denote conformity
with Directives 2014/35/EU (Low Voltage) and
the EMC directive (2014/30/EU), as amended.
DISPOSAL
Dispose of the packaging according to type.
Put cardboard and carton in the waste paper
collection, foil in the recyclables collection.
Do not dispose of the device in normal
household waste. The product is subject to
the European Directive 2012/19/EU.
Dispose of the device via an authorized
disposal company or via your municipal waste
disposal facility.
Observe the currently applicable regulations.
In case of doubt, contact your disposal facility.