Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HOOKING UP YOUR PODCAST RECORDING SYSTEM
MICROPHONE
COMPUTER
FIREWIRE
1. Connect the included microphone to the XLR input of Channel 1 using the microphone
cable also included in the kit.
2. Connect the Multimix to your computer using the included Firewire cable.
3. Connect the MAIN MIX output of the Multimix to your speakers using ¼ inch TS cables.
Alternatively, if you do not own speakers, you can connect the headphones that come
with your kit to the PHONES output so you can monitor your session. This is a good idea
since you will probably experience feedback from your speakers if you have them turned
on while your microphone is on.
CD-PLAYER OR OTHER
LINE-LEVEL DEVICE
4
HEADPHONES
POWERED SPEAKERS
Werbung
