Lightburn Modifica Il Valore Massimo Della Corsa Dell'asse Y - Atomstack R5 Benutzerhandbuch

LightBurn modify Y-axis maximum travel value
1.Run LightBurn, connect to engraver, "Ready"displayed at
2 indicates connection succeed
(4)Notes: When the conveyor is not in use, $131 value needs to be modified back to default value
2.Go to Machine Settings
under Edit nenu
51
3.Expand output, locate Y max travel(m-
m)($131), modify the value to 800, click
Write then OK to finish