Philips GC9950 Bedienungsanleitung Seite 11

6 Set the ironing board to the appropriate height with the height
adjustment lever.
7 Take the iron out of the iron compartment, either from the left or
the right side.
8 Press the iron power-on button to activate the steam generator.
The 'iron ready' light starts to flash.
,
After approx. 2 minutes the 'iron ready' light stops flashing and lights
,
up continuously to indicate that the steam generator is ready for use.
9 Press the steam trigger to start steam ironing.
Never direct the steam at people.
10 If you want to iron in the board blowing mode, press the blowing
button on the iron.
- The blowing mode provides a cushion of air that prevents shine and
seam imprints.
- The blowing mode cannot be switched off.
- The large ironing board is equipped with heating elements that heat
up in the ironing board. This allows easier, faster and more convenient
ironing.
EnGlIsh
11