Storage Function; Maintenance And Cleaning; Troubleshooting Guide - Witeg Wisd Rk Bedienungsanleitung

 Press the MODE button once more to leave the key lock. Than you are in the menu item
"set speed".

6.6 Storage function

The RK-D Programmable Rocker
is practical if you want to work with the same parameters often. Then you need not to set them
in every usage.
 For storing values you only need to hold the Jog-Shuttle knob pushed for two seconds.
Successful storing is displayed by blinking of the SV for three times.
 Every stored parameter is erasable. Turn the value with the Jug-Shuttle till "0" and then
hold the knob pressed for two seconds.
 If you want to store a new value it is not necessary to erase the old one.

7 Maintenance and cleaning

 Please read the whole safety instructions before you start to maintain or clean the device
and pull the power plug out of the electrical outlet.
 Only use care cleaning agents and soft cleaning rags.
 Organic lotions, strong chemicals and rough cleaning rags can damage the device.
 If you not want to use the device for a long time, pull of the power plug and keep it dry in
the package.
 Only use original spare parts.

8 Troubleshooting Guide

Situation
 Check the supplied voltage is present.
 Check the power connection and the power cord for proper connection and
Power Failure
integrity.
 Check if the MAIN Power Switch is "ON".
 Fuse is blown.
 Check if the MAIN Power Switch is "ON".
Unit Not
Stirring  Check the set RPM.
 Errors on the Drive.
ERROR 1
If other problems arise, or one of the above not solves problems, please contact your
official agent or the manufacturer.
Reparations and amendments should only made by
Contraventions exclude the warranty.
18
includes a storage function for speed and delay values. That
Confirmations and Solutions
witeg Labortechnik GmbH, RK-D Programmable Rocker
www.witeg.de
witeg authorized people.