Positioning The Device And Commissioning; Job Description; Menu Structure; Set Speed - Witeg Wisd Rk Bedienungsanleitung

5 Positioning the device and commissioning

1. Follow especially the safety instructions
marked with following symbol:
2. Remove the package carefully.
3. If there are any unexpected transport damages, please inform your forwarder and your
costumer service.
4. Remove perhaps soiling and package material.
5. Before you connect the device with the electrical outlet, please let some time laps until
the device is acclimatised.
6. Make sure that you follow all safety instructions.
7. Connect the device with the power outlet.
8. Switch the device on.
9. Set your values and start the process (look at point 6).

6 Job description

6.1 Menu structure

main switch
1
„on"
2
6

6.2 Set speed

 First menu item after switching the device on is the menu "set speed". The shaking lamp
is blinking. You can recognize this menu at „RPM" in SV- und PV-line.
 If there is showed "O RPM" in the SV line, there is no value stored and you can start the
stirring process by turning the Jog-Shuttle knob clockwise.
 If "STIRRING" is blinking on the LCD there is a speed value stored. The saved value is
showed in the SV-line and you can start the stirring process by pushing the Jog-Shuttle
16
set speed
key lock
set turn-off delay
3
choose program
4
hold
Jog-Shuttle
pushed
change program
5
witeg Labortechnik GmbH, RK-D Programmable Rocker
www.witeg.de
hold
Jog-Shuttle
pushed