Heating Function - Rondell Rde-1621 Die Betriebsanweisung

End of cooking program
– At the end of the cooking program, 5 short beeps will
sound and the digital displays (24) will show «0:00».
– Depending on the selected cooking program, the
device will automatically switch to the keep warm
mode, while the indicator (24) will show the operating
time of the keep warm function.
– To end the cooking program, press the «Keep warm/
Cancel» button (22) once, an audible signal will sound
and the multicooker will switch off.
Keep warm function
– After the execution of certain cooking programs,
the multicooker will automatically switch to the keep
warm mode, while the digital indicators (24) «0:00»
will be displayed on the control panel (2).
– The keep warm function operation time will be shown
with digital symbols on the control panel (2).
– The maximal operation time of the keep warm func‑
tion is 24 hours.
– The temperature in the keep warm mode is 65‑80°C.
– To disable the keep warm function, press the button
(22) once, an audible signal will sound and the multi‑
cooker will turn off.
Note:
– despite the unit keeps the ready dish warm up to
24 hours, it is not recommended to leave the cooked
food in the bowl for a long time, because this may spoil
the food.
– the keep warm function works in all cooking programs.
Delayed start function
Use this function if you want to delay the food cooking
start for a certain amount of time.
– To set the delayed start time, after selecting the
desired cooking program, press the «Delayed start»
button (29), at the same time an audible signal will
sound and indicators (24) will display flashing digi‑
tal symbols of the delay time on the control panel (2).
– By pressing the buttons (28) set the desired
time before the start of cooking (possible setting
time 1‑24 hours). Note, that you should take into
account the running time of the automatic program
while setting the delay time.
– 3 seconds after the delay start time has been set, the
delay start time display will stop flashing and remain
lit, and the delay start countdown will begin.
– When the delayed start time is over, the multicooker
will switch on and start cooking food in the preset
cooking program.
– To switch the delayed start function off, press the but‑
ton (22) once, you will hear a sound signal, and the
multicooker will be switched off.
Note: the delayed start function is not available in
«Porridge» and «Fish» programs.

Heating function

The Heating function is used to heat previously
cooked food before eating it. An additional plus can be
considered the fact that heating food in the multicooker
avoids the appearance of carcinogens.
To heat food in the multucooker.
– Transfer it to the bowl (9), controlling the allowable
volume with the help of special limit marks located on
the inside of the bowl (9).
– Place the filled bowl into the working chamber of the
multicooker, making sure that it fits snugly against the
heating element.
– Close the lid (3) tightly until you hear a click.
– Press the «Heating» button (21) to activate the func‑
tion. The time on the display (24) will flash. If neces‑
sary, set your preferred Heating time as described in
the Changing the cooking program time section.
– After 3 seconds, the time on the display (24) will
light up permanently. The multicooker will switch to
the Heating mode. The time indicators on the dis‑
play (24) will show the countdown to the end of the
program.
– At the end of the program, 5 short beeps will sound,
after which the multicooker will switch to the keep
warm mode. The display (24) will show the duration
of the keep warm program.
21