Herunterladen Inhalt Inhalt Diese Seite drucken

TIGMON lauben Multifunction Rice Cooker 2000BW Benutzeranleitung Seite 21

Inhaltsverzeichnis
If the bottom of the inner pot is scorched, pour warm water into the pot and add a small amount of dishwashing detergent.
Allow it to sit for a while, then wash.
Inner Lid
Press the lid open button to open the lid.
Remove the inner lid and remove the silicone seal from its outer edge, and remove the silicone seal around the inner oval
opening.
Wash the inner lid and silicone seal in warm water with a little dishwashing detergent. Rinse with clean water and wipe dry.
Place the silicone seal on the inner lid so that the longer edge faces the interior of the rice cooker.
Place the silicone seal of the inner oval opening inside the opening and spread it evenly.
Place the inner lid so that the oval opening in the inner lid is aligned with the steam outlet on the inside of the lid. Press gently
until the inner lid fits properly.
Outer Surface
Wipe the outer surface and the inside of the rice cooker with a soft sponge slightly dampened in warm water. Wipe dry with
a clean cloth.
STORAGE
Before storing, clean the rice cooker according to the instructions above.
Store the rice cooker in its original box or other packaging in a dry and shaded place out of reach of children and pets.
TROUBLESHOOTING
In the table below, you will find possible problems and their solutions that you may encounter during use. It will help you
resolve the problem before contacting an authorised service centre.
If the problem is not listed in the table or persists, stop using the rice cooker and contact an authorised service centre. Do not
attempt to repair the rice cooker yourself. There is a risk of electrical injury.
Problem
After connecting to a power source, the
display does not light up and the heating
element does not heat up.
After connecting to a power source, the
display does not light up but the heating
element heats up.
After connecting to a power source,
the display lights up but the heating
element does not heat up.
Cause
The power cord is not properly inserted
into the socket, or the plug end of the
power cord is not properly inserted into
the receptacle.
The mains socket you have plugged the
rice cooker into is not powered or has
a tripped circuit breaker.
The mains socket into which you have
plugged the rice cooker is damaged or
the electrical circuit is damaged.
Fault in the internal circuit.
Fault in the internal circuit.
Fault in the main thermostat.
Fault in the internal circuit.
Fault on the motherboard.
Solution
Check the connection of the power cord
or the plug.
Plug the power cord into a different
socket or reset the circuit breaker.
Contact a qualified electrician.
Contact an authorised service centre.
Contact an authorised service centre.
Contact an authorised service centre.
DE
EN
CZ
SK
PL
HU
SL
HR
|
21
Inhaltsverzeichnis
loading

Inhaltsverzeichnis