Greencut GLM200L-2 Leitfaden Seite 73

OPERATION
MOWING HEIGHT ADJUSTMENTS
The mower has 5 cutting heights: 25 mm, 35 mm, 45 mm, 55 mm and 65 mm. Follow the
indications below to reposition the one that best suits the job to be done.
MOWING HEIGHT ADJUSTMENTS
Warning: Disconnect the battery from the mower and make sure the blade has stopped
coasting before adjusting the height.
Pull the cutting height adjustment lever away from the mower body and move it to the desired
cutting height.
The following table shows an approximate relationship between the governor number and the
actual cutting height:
NUMBER
1
2
3
4
5
CUTTING HEIGHT
25 mm
35 mm
45 mm
55 mm
65 mm
73
17
Note: Mowing height numbers should be used as a guide only, depending on turf
conditions. Actual lawn height may be slightly different from the stated height.
Try mowing the lawn in a less visible location fi rst to obtain the desired height.
EN - GLM200L