Man In Cold Room Alarm Kit Components; Product Identification Codes; Technical Characteristics - Pego ECPAPE03 Bedienungsanleitung

ECPAPE03
CHAPTER 1: INTRODUCTION

MAN IN COLD ROOM ALARM KIT COMPONENTS

1.1
THE MAN IN COLD ROOM ALARM KIT consists of:
- Visual/acoustic alarm control unit complete with buffer battery.
- N° 3 seals, to be inserted between fixing screw and box backing.
- Emergency cold room light switch.
- Use and maintenance manual.
1.2
ECPAPE03
.
1.3
Mains power supply
Max consumption on mains power
Buffer battery
Operating autonomy
Out-of-room module
Acoustic characteristics
Visual warning
In-room emergency pushbutton
Auxiliary relay
USE AND MAINTENANCE MANUAL
Pag.14
- ENG -
PRODUCT IDENTIFICATION CODE

TECHNICAL CHARACTERISTICS

230 V AC 50 Hz
20 mA
12 V DC Ni-MH 1300 mAh
Complete recharge time: 110 h
- With 230 V AC NOT ON
(running on charged buffer battery) :
- With 230 V AC power ON:
IP 43 protection rating
Operating temperature: -5 - +45 °C
Type: piezoelectric
Sound power: 90 dB at 1m
Flashing red LED, 12 V DC
Lighting: red LED, 12 V DC
NC contact
Keypad with IP65 protection rating
Operating temperature: -25 - +70 °C
8A AC1 (contact closes with alarm on)
CHAP. 1 - Introduction
kit complete with luminous/acoustic man in
cold room emergency alarm.
Rev. 1-09
14 h approx.
unlimited