Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important
Precautions
• Do not look directly at the projection beam with your eyes, because the strong beam may harm your eyes. RG2 IEC 62471-5.12015
• Do not block Or cover the heat dissipation holes of the device to avoid affecting the heat dissipation of the internal parts, and damaging
the device.
Keep away from humidity, exposure, high temperature, low pressure, and magnetic environments
• Do not place the device in areas susceptible
• Place the device in a flat and stable station, and do not place the device on a surface that is prone to vibration
• DO not allow children to handle the device without supervision
• Do not place heavy or sharp objects on the device.
- Avoid extreme vibrations, because these may damage the internal components
• Please use the correct type of battery for the remote control
• Only use attachments/accessories
(such as the exclusive power adapter, bracket, etc.)
• Do not disassemble the device. The device should only be repaired by staff authorized by the manufacturer.
- Place
and
use the
device
• The plug is considered
as a disconnected
• The adapter should be installed near the equipment, and should be easily accessible
• Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
and the point where this exits from the device.
Unplug this device if there are lightning storms or when unused for a long period of time
• Where the power plug or an appliance coupler is used to disconnect
device would remain readily operable
• Never touch the power cable or power connector with wet hands
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
16
to excessive dust and dirt
specified or provided by the manufacturer
in a 0-400C
environment
device of the adapter.
receptacles,
the device, the disconnected
to local regulations
RG2
O
Werbung
