cecotec BIGDRY 9000 PROFESSIONAL CONNECTED Bedienungsanleitung Seite 22

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Top panel
2. Left housing
3. Wheels
Display
4.
5. Right housing
6. Base plate
7. Power cord
Filter
8.
9. Water tank
Control panel. Fig. 2
Touch icons
1. Dehumidification speed
2. Mode
Settings
3.
4. Timer
5. On/Off
LED indicators
6. Child Lock
7. Low speed
8. High Speed
Safety system
9.
10. Drying mode
11. Dehumidification mode
12. Humidity percentage
13. Timer
14. Temperature
15. Full tank indicator
16. Display
The display of the appliance will show:
- Room humidity level (when plugged in).
- Once the humidity level is set, it will display it.
- The time set for automatic switch-off.
42 BIGDRY 9000 PROFESSIONAL CONNECTED
BIGDRY 9000 PROFESSIONAL BLACK CONNECTED
- When ambient humidity is lower than 35%, it will show "35".
- When ambient humidity is higher than 95%, it will show "95".
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- When installing the device, ensure a minimum safety distance of 20 cm on each of its
sides. Fig. 3
3. OPERATION
On/Off
- The device will beep when it is turned on, and the LED will display the room humidity level
for 3 seconds. Then, the display will turn automatically off.
- Press the On/Off icon to start operation. Press it again to stop operation.
Lock
Press the On/Off icon for 3-5 seconds to activate the
child lock system. Press and hold it again for 3-5 seconds to deactivate it.
Dehumidification speed
- Press the "dehumidification speed" icon to enable this function. Press the same icon to
select between low or high speed. The fan indicator light will come on.
- The fan speed can be adjusted in Drying mode.
- When humidity level is 55 % or over, the speed will automatically operate at high speed.
- When humidity level is under 50 %, the fan will automatically operate at low speed.
- When humidity level is 50-55 %, then fan speed will switch between high/low speed
automatically.
Humidity settings
- Press the Settings touch icon to adjust the humidity level.
- The default humidity in dehumidifying mode is 40%.
ENGLISH
BIGDRY 9000 PROFESSIONAL CONNECTED
BIGDRY 9000 PROFESSIONAL BLACK CONNECTED
43