Before First Use; Cleaning And Maintenance - Princess Purify Benutzerhandbuch

1. Put the bottom baking plate into the low slot of the main body.
2. Insert the heating element into the other slot of the main body.
3. Fix the screw to tighten the heating element.
4. Place the stabilizer of the heating elements tightly into the bottom baking plate.
5. Put the top baking plate on top of the heating element.
Filter
For replacement, its recommended to buy an aftermarket filter A
filters are commonly used for kitchen hoods. Before replacement, make sure to cut the new filter to the same
size as the original (max size 16cm x 4cm, max thickness 1cm)

BEFORE FIRST USE

• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the
device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket.
• Turn the temperature control knob A clockwise to the highest setting and allow the device to heat up
5
for at least 5 minutes without food.
• The indicator light A will stay on when the thermostat A
6
when the thermostat is set at a lower level and that desired temperature has been reached.
• When the device is turned on for the first time, a slight odour will occur. This is normal. To ensure
adequate ventilation, turn the ventilation control knob A
ventilation. The fragrance is only temporary and will disappear soon.
• We advise to place a heat resistant coating between your table and the appliance (this way you don't
get burn marks on your table or table cloth).
USE
Using the baking plate
• The baking plate(s) A should be rubbed in with some food oil.
3
• Pre-heat your appliance on the highest level for 5 minutes before using it.
• Use the temperature knob A on the thermostat to choose the desired temperature.
5
© Princess | Raclette Purify
2 3 5
1 4
with activated carbon. These type of
9
is turned to maximum, it will only go out
5
clockwise to turn on the device's built-in
7
8 | 01.162660.01.001
• The indicator light A will stay on when the thermostat A
6
when the thermostat is set at a lower level and that desired temperature has been reached.
Use the ventilation knob A
• to choose the desired ventilation strength.
7
• The ventilation indicator light A will turn on when the ventilation is working at the desired level.
8
• When you put your food on the baking plate A
• Do not use anything metal, to avoid damaging the non-stick coating.
• Small pieces of meat and/or fish cook quicker than big pieces.
• Do not pierce the meat; this makes it lose some of its juices and some of its flavour.
• During cooking, any bits of food left behind should be removed immediately to prevent them from
sticking onto the plate.
• Never put frozen food on the baking plate A
• The pans B can also be used to cook meat, make sure it is sliced thin.
w
• Never move the baking plate A when it's hot. You could get burned.
3
Using the ventilation
Use the ventilation control knob A on the main body A
7
There are 3 ventilation settings:
1. OFF: no ventilation
2. Low: low ventilation
3. High: high ventilation
When the ventilation has reached the desired setting, the ventilation indicator light A
the ventilation is off, the light will turn off.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance and wait for the appliance to cool down.
• Never pour cold water on a hot plate, this could damage the device and can cause splashing hot
water.
• Wipe the inside and the edges of the appliance with a paper towel or a soft cloth.
• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel
wool, which damages the appliance.
• Do not immerse the appliance in water or any other liquid.
• The pans B are not dishwasher safe, hand wash them with warm soapy water.
w
• The baking plate A can be cleaned in a dishwasher after it has cooled down completely, however,
3
hand washing with warm soapy water will help to extend the durability of the product.
• Allow all parts to dry completely or dry them with a towel.
STORAGE
1. Take the top baking plate off of the heating element .
2. Put the foot back up, unscrew the screw and take out the heating element .
3. Take the bottom plate out of the bottom slot of the main body .
4. Repeat these steps on the other side of the main body .
5. Place all the loose parts carefully into the original box for storage.
Store the appliance in a dry and enclosed space.
ENVIRONMENT
The crossed out wheelie bin symbol means that this product shall not
be disposed of with normal household waste. Electronic and Electrical
Equipment not included in the selective sorting process are potentially
dangerous for the environment and human health due to the presence of
hazardous substances. Please dispose of responsibly at an approved waste
or recycling facility.
SUPPORT
You can find all available information and spare parts at www.princesshome.eu!
User manual
is turned to maximum, it will only go out
5
, make sure to turn it regularly.
3
, the heat shock could damage the plate.
3
to choose the desired ventilation setting.
1
will turn on. When
8
9