Etherma LAVA-BASIC 3.0 Montage- Und Gebrauchsanleitung Seite 11

W A L L - C E I L I N G I N S T A L L A T I O N
1. Hold the mounting rail at the desired position where the
LAVA® is to hang later and mark the drill holes.
3. Hang the LAVA® on one side in the intended suspension
and make sure that the LAVA® is correctly engaged.
5. If the LAVA® is securely attached, you can connect the ap-
pliance to the power circuit.
7. You can now also insert the locking pins in the two outer
holes on the opposite side.
2. After you have drilled the holes and inserted the dowels
screw the mounting rail to the wall or ceiling.
4. Hook the safety rope into the lug and bend the lug so that
the rope can no longer slip out.
6. Push the LAVA® towards the mounting rail and insert the
locking pins to secure the device in the mounting rail.
ATTENTION:
The LAVA ® can also be mounted on the wall. Please make sure
that you mount the mounting rail in such a way that the LAVA
is to be clipped in at the bottom and the safety ridges are at
the top!
®
11