Silvercrest SEM 120 A2 Bedienungs- Und Sicherheitshinweise Seite 30

˜ Attach/detach blades
The blades attach to one another at the front via a stud
[ 8 ]
and rivet .
9 ] [
Attach the blades
Guide the rivet
right blade (Fig . D) .
Place the blades
Detach the blades
Slide the right blade forward .
Remove the rivet
˜ Insert/remove the blades
Insert the blades
Unplug the plug
Hold the attached blades
Insert both blades
product .
Push the blades
blade holder
Both blades
the blades
[ 8 ]
blades, they are firmly inserted .
Remove the blades
Unplug the plug
Press the blade release
Pull the blades
holder .
[ 1 ]
˜ Cutting
Plug the power plug
Hold the product by the housing . Your thumb is on the on/off
switch . Your index finger is on the switch-on lock
3 ] [
Hold the blades
Press the switch-on lock
Turn on the product: Slide the on/off switch
I position .
Turn off the product: Release the on/off switch
back the O position .
of the left blade into the stud
[ 9 ]
parallel to one another (Fig . E) .
[ 8 ]
from the stud
[ 9 ]
from the power outlet .
5 ] [
[ 8 ]
into the blade holder
8 ] [
by the blade handles
[ 8 ]
.
[ 1 ]
must noticeably click into place . Try to pull out
8 ] [
by the handles
from the power outlet .
[ 5 ]
.
[ 2 ]
by the blade handles
8 ] [
into an appropriate socket .
[ 5 ]
on the food .
8 ] [
with your index finger .
4 ] [
.
9 ] [
by the blade handles
[ 1 ]
firmly into the
7 ] [
. If you cannot remove the
7 ] [
from the blade
7 ] [
3 ] [
9 ] [
of the
9 ] [
.
[ 7 ]
on the
.
4 ] [
to the
so it slides
3 ] [
GB/IE 29