Defort DCF-12/230 Bedienungsanleitung Seite 19

CHARACTERISTICS OF OUR PRODUCTS
Mini Thermoelectric Cooler and Warmer are popular with drivers and fi eld opera-
tors in some developed countries in Europe, America and so on. It can bring you
cool drinks in hot summer and warm food in winters with cold wind blowing.
No matter in outdoors hiking traveling by car or in traffi c jam, you can enjoy
plenty of drinks and foods at a proper temperature.
This cooler and warmer may be carried on your back or in hand for its light-
weight. Matching with AC or DC transformer attached, it can be used indoors,
especially for students to store cool and hot drinks and foods in their own room.
If it is placed in hotel , offi ce or sitting room, its graceful design, beautiful appear-
ance, luxury style and extraordinary applicable function, will bring you a sense
of ease and comfort when you are holding a cup of cold drink in your hand after
work.
It integrates dual functions of cooling and heating by employing semiconductor,
without compressor or cryogen. It has advantages of being free from pollution,
small volume, lightweight, portability, long service life and lowest power con-
sumption.
To obtain optimized cooling effect, we suggest putting in pre-chilled foods and
drinks. It will take 2 or 3 hours for cooling the unfrozen foods or drinks.
The cooler and warmer is not designed to heat cold food but to preserve hot
foods at a warm temperature. If necessary, it can heat the foods with more than
2 hours.
If it's applied properly following the direction, the temperature of foods can be
kept for hours.
1. First make sure the switch at the side of the cooler and warmer is in OFF state,
and then insert the plug of the power cord into the socket of the unit.
2. Insert the plug of the cigarette
lighter into the cigarette lighter in
the car.
3. Cooling: set the power switch at
the position of COLD. The green
indicator will be on indicating the
unit is in cooling mode.
4. Heating: set the switch at the po-
sition of HOT. The red indicator
will be on indicating the unit is in
heating mode.
WORK PERFORMANCE
OPERATION GUIDE
19