Herunterladen Inhalt Inhalt Diese Seite drucken

Meaco MeacoMist Anweisungshandbuch Seite 6

Ultrasonic luftbefeuchter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

HUMIDIFIER SETUP AND USE
Place the humidifier in an upright position on a stable, flat surface.
Please ensure the unit is a safe distance away from a wall or furniture. Do not allow the mist to blow directly onto furniture,
surfaces, ceilings or walls.
Always unplug the humidifier before you remove or refit the water tank. Water is likely to drip from the tank whenever you
remove it.
Ensure the tank is correctly fitted, if the tank is empty or is not in place, the "Empty Tank" light comes on, an alarm will
sound and the humidifier will turn off.
Do not use with softened water as sodium deposits from the water softening process will form within the room.
Those in hard water areas might like to use filtered, distilled or cooled boiled water instead of tap water.
If you are unsure if your water is hard you can check with your water supplier via their website or their customer service
department.
Important: Soak the water filter in tap water for 2 hours before inserting it into the humidifier. This helps to
activate the filter for it to work at maximum efficiency.
To operate safely
Do not insert small objects into the unit or this will damage it and cause a hazard.
Do not remove the tank when the humidifier is running or water may leak.
Minimum operating condition 5°C to avoid the water from freezing.
Do not add water that is above 40°C.
ATTENTION !
Never use the device with a damaged power cord, plug, cabinet or control panel. Never trap the power cord or allow
it to come into contact with sharp edges.
Always unplug the mains cable from the wall socket when removing or replacing the water tank.
Failing to follow the instructions may lead to the guarantee becoming void.
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis