Manual Mode - Vasner Konvi Rx Serie Montage- & Bedienungsanleitung

VASNER
Display heating mode in automatic mode
When the heating is actively heating in heating mode, the LED display „Hea-
ting mode" lights up red. This allows you to see at any time whether a radiator
is heating.
Connecting several radiators for automatic mode
If you want to connect several radiators to one transmitter in one room, briefly
press the M button twice on all the desired radiators so that the connection
indicator flashes on all the radiators. Then continue with point 3 „Automatic
mode" and activate the „Pairing" function of the transmitter.
Adding heaters to a circuit subsequently
If you want to subsequently establish a connection or connect a heater to
another radio transmitter, press the M button on your heater 2x, wait until the
LED connection indicator flashes and proceed as described above. Important:
Other heaters in the room already connected to the thermostat remain con-
nected to the already paired thermostat. The new heater is merely added.
Change heating circuit (e.g. room change)
If you want to integrate the heating in another heating circuit and connect it
to another radio transmitter, place the unit in any other location within range
of the new RX radio thermostat transmitter. To connect your heating to the
transmitter, press the M button on your unit 2x, wait until the LED connection
indicator flashes and proceed as described above. Important: If the heater was
previously connected to another thermostat, the old connection will automa-
tically expire when you connect the heater to a new thermostat. Other heaters
in the room already connected to the thermostat remain connected to the
thermostat. The new heater is simply added.

Manual mode

If you press and hold the M button for 3 seconds, you enter manual mode. The
LED connection indicator is always off in manual mode. The radio connection
is now deactivated and your Konvi RX hybrid heater is now ready in manu-
al mode to be operated, for example, with a Smart Home control, a socket
thermostat or another external control unit. All VASNER infrared heaters are
34