Important Safety Information - Vasner Konvi Rx Serie Montage- & Bedienungsanleitung

VASNER
Infrared heating
The Konvi series heats with the latest hybrid technology. Pleasant radiant heat,
as you know and feel from warm sunlight. With the hybrid heating, the internal
infrared technology heats the trapezoidal convectors installed inside, in addi-
tion to the radiant heat directed forwards. These provide additional heated air
and additional efficiency of approx. 34% convection heat. Cold air is drawn in
through the lower air vents and expelled as warm air through the air vents at
the top. This provides a significant plus in heat - in addition to the infrared heat.
The Konvi series combines the best technology and efficiency from two heating
methods.
Benefits of the Konvi series:
1. integrated radio receiver
2. integrated power switch
3. manual & automatic operation mode
4. Latest combined infrared and convection technology
Safety information
Please read the user manual carefully and store the manual
where it can be accessed by all.
Use and intended use
VASNER infrared heaters are intended exclusively for use and
installation on interior walls. Installation in damp rooms must be
carried out by a specialist company in accordance with VDE.

IMPORTANT SAFETY INFORMATION

Below we have summarised the most important safety instruc-
tions to prevent possible hazards such as injury, fire or electric
shock when handling electrical appliances. Please read them
carefully before operating the appliance. Please always observe
the following safety instructions:
25