Mestra R-040061 Bedienungsanleitung Seite 13

Caution: Before switching the machine on, read through these instructions carefully.
INTENDED USE
Vestacast induction casting machine is intended solely for dental laboratory use, for melting and
centrifugally casting all conventional dental alloys with the exception of titanium. This machine should
only be used for the intended purpose. The producer refuses any liability for damages originating from
any other use of the machine. Intended use also includes adhering to the instructions for use as well as
servicing and carrying out maintenance work at regular intervals.
GUARANTEE AND LIABILITY
Guarantee and liability claims for damages to persons or equipment are invalid if the damage is found to
have been resulted from any of the following cases:
Improper installation, operation, assembly or maintenance of the machine.
•
Use of the machine other than for the purpose intended.
•
Operation of the machine with faulty safety equipment or improperly installed or non-functioning
•
safety and protective devices.
Disregarding the guidance in the instructions for use relating to transport, storage, assembly,
•
operation and maintenance of the machine.
Inadequate monitoring of parts exposed to wear and tear.
•
Unauthorized structural alterations to the machine.
•
Repairs carried out improperly.
•
GENERAL INFORMATION FOR THE SAFE USE OF THE EQUIPMENT
Do not modify the machine in any way.
•
The machine should not be used if it is in any way faulty.
•
Keep the working area clean. Untidiness at the workplace increases the risk of accidents.
•
Do not reach into the machine while it is running. Do not open the machine until the casting arm is at
•
rest. The casting chamber cover cannot be opened when the arm is rotating.
For safety reasons, use only accessories and materials recommended by the instructions. Using
•
materials other than those recommended in the instructions constitutes an accident risk for the
operator and cannot therefore be regarded as intended use.
Always disconnect the machine from the mains before commencing any maintenance work.
•
HIGH RISKS
The machine operates generating high frequency electromagnetic waves and should not
be operated by anyone having a heart pacemaker.
Risk of burns on contact with the crucible or mould ring.
Always use tongs to remove the hot mould ring after casting.
Risk of fire! Do not place any flammable object in the casting chamber.
English
13