1More ColorBuds 2 Bedienungsanleitung Seite 2

Product Overview
Charging Contacts
Silicone Ear Tip
O
Infrared Sensor
pairing Button
Headphones Pairing
The Left and Right headphones will automatically
pair to eachother after the lid is open when they
are in the case (with charge).
Bluetooth Pairing To The Device
To connect to your device for the first time, turn the
headphones on to enter the pairing mode, the Right
headphone will flash in white alternatively. Headphones
will enter a standby mode if not paired to a device within
3 minutes
After the first successful pairing, headphones will
automatically connect to your device.
To pair the headphones to a new device, simply place
them into the charging case and press the pairing
button for 2 seconds. Then click "1 MORE ColorBuds
in the new device pairing list to connect
After the first successful pairing, headphones will automatically
Battery Status Display in 1MORE MUSIC APP
Battery status of headphones and charging case will be displayed in 1MORE MUSIC APP
Home
1 MORE ColorBuds 2
Battery Notification
LED indicator for low battery: when
there is 25-30 minutes of use left, you
will hear the notification sound and the
LED indicator will flash white twice
Smart Playback
An IR Sensor automatically detects when you take out your headphones to stop
playback intuitively and resumes playback when you put them back in.
To turn off Auto-Play, connect the headphones to the 1MORE MUSIC App and change in
the settings
Personalized Sound Enabled by SoundlD
1MORE MLJSIC APP applies with the personalized sound technology
professional music-producing reference standard, SoundlD can calculate out the best EQ for ears
and solidify it to the headphones for any time use
Click "SoundlD" in the App homepage to set up for your personalized sound
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from defective
materials and workmanship for a period of one year from the date of purchase if it is properly used
and maintained If this product proves defective in either material or workmanship,
option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an
equivalent new or refurbished product, at no charge for parts or labor. It the product model is no
longer available and cannot be repaired effectively or replaced with an identical model, IMORE at
its sole option may replace the unit with a current model of equal or greater value In some cases,
modification to the mounting surface may be required where a new model is substituted.
assumes no responsibility or liability for such modification
UNDER THE TERMS OF THIS WARRANTY, PLEASE
AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT
PARTS OR REPLACE THE PRODUCT WITH AN EQUIVALENT
You will be required to submit a proof of purchasing details, including but not limited to a receipt or
sales invoice
Return shipping for exchanges/repairs is the sole responsibility Of the original retai purchaser
Limitations:
• This limited warranty does not cover the failure Of the product resulting from improper installation,
misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, inc uding paint damage, Or consequential
damage to other components or premises which may result for any reason from the failure of the product
• This limited warranty is null and void for products not used in accordance with 1MORES instructions
• This limited warranty is null and void for products with altered or missing serial numbers and for products
not purchased from an AUTHORIZED dealer
• This limited warranty terminates if you sell or otherwise transfer this product to another party
FAQ
1 Why the headphones cannot be turned on?
Check it your headphones have enough battery life
2. Why the headphones cannot connect to my cel phone, or take a long time to connect?
1) If the earbuds cannot pair to one another, and only one earbud will pair with your cel phone, then put
both buds back into the charging case and quickly press the pairing button 3 times, click the device
name, they should now pair correct y to the phone
2) TO pair the earbuds to a new cellphone, simply place them into the charging case and depress the
pairing button for 2 seconds Then click the new device name and pair with the new cellphone
3. Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right Of your
device name and make sure the "Media Audio" option is on
4 Why there is no sound from the headphones while making phone calls after successfully connecting
to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Phone Audio" option is on
5. Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device Avoid solid barriers in between
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS
3) Please make Sure the Bluetooth antenna Ofyour device is not blocked
6 Why some control functions do not match those in the manual while using third party music/video
player Apps?
Your operating system and the third party music/video player apps may have different settings for the
in-line remote control functions. We recommend that you use the music/video player apps that your
device has originally provided
• For more detailed product FAQs, please visit the product support section under www. 1more.com
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire,
explosion, leakage of corrosive electrolyte etc);
Disposal Of a battery into fire or a hot oven, or mechanically crushing or cutting Of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding
explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air
pressure that may result in an explosion or the leakage of flammable liquid or gas
— The symbol indicates DC voltage
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment
This means that this product must be handled pursuant to European directive 2014/53/'ElJ in order to
be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent
he buys a new electrical Or electronic equipment
To prevent possible hearing damage, do not listen at high volume levels for long periods
Supplier's Declaration of Conformity
47 CFR 2 1077 Compliance Information
Unique Identifier:
Trade Name: 1 MORE
Model No ES602
Responsible Party - U S Contact Information
1 MORE USA, Inc
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: support@l moreusa.com
C regulatory conformance
This device complies With CAN ICES-003
This device contains licence-exempt
and Economic Development Canada s licence-exempt
two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired
operation Of the device.
cet appareil est conforme Ia norme CAN ICES-003 (B)/NMB-003
Cet appareil contient des émetteurs / récepteurs exempt (s) de licence qui Sont conformes aux RSS
exemptes de licence d 'Innovation, Sciences et Déve oppement économique
fonctionnernent est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d interférences
(2) Cet appareil doit accepter toute interférence, y compris les interférences
provoquer urnfonctionnement indésirable de 'appareil
The SAR limit OfCanada (ICES) is 1 6 W/kg for head averaged over one gram Oftissue
Device types ES602
(10:24662-ES602L (Left ear) , 24662-ES602R (Right ear) ) has also been tested with
Omm against this SAR limit
Do not put the battery in trash that is disposed of in landfills When disposing of the battery',
comply with local laws or regulations
Pickup Mic / LED
Voice Mic
Charging Case
LED Indicator
2"
connect to your device.
O
When the charge is too low on
the case battery, the LED
indicator will flash red.
SoundlD Based on
1MORE, at its
IMORE
TO OBTAIN A REPAIR OR REPLACEMENT
RETURN TO THE ORIGINAL DEALER FIRST
WITH NEW OR REFURBISHED
NEW OR REFURBISHED PRODUCT
not, please charge them for at least 30 minutes
environment that can result in an
NVEEE)
recycling organization Or to the retailer when
and CAN PSS-216 / CNR-216
that comply with Innovation, Science
RSS(S) Operation is subject to the fol owing
(B) et CAN RSS-216 / CNR-216
Canada Son
susceptibles de
In The Box
Headphones x 1 Pair Type-C Charging Cable x 1
Charging Case x 1
IMOPE
User Guide x 1 Warranty Card x 1
Placement
Power
c5
Power On: Take the headphones Out Of
the charging case (with charge), the
headphones will turn on automatically
• Above functions are available for either earbud
Charging
(t) TOcharge the case with Type-C cable.
A full charge wil take around 85 minutes
• The headphones are certified by Qi wireless charging, please use a Qi certified charging pad to ensure
charging safety and efficiency
@ To charge the headphones with the case.
Put headphones in correct slot until it
locks in via the magnet The white light of
headphones will indicate headphones are
charging
Touch Controls
Switch the Listening Modes
The default setting of the headphones is 'ANC On", touch and hold on the outside of the headphone
to switch "ANC On" to •Pass-through'
Phonecalls and music can be controlled by tapping the outside Of the earbuds
Touch Control
Phone Call
cfi
Playback
Above functions are available for either earbud
To decline a call, change a song or control volume, please operate on IMORE MUSIC APR
paired mobile phone or device.
Above functions may vary with different devices.
Extra Functions
If only 1 headphone can be paired to the device, Open the case, click the pairing button in
the case 3 times quickly to initiate a Left & Right pairing, and then click • 1MORE ColorBuds
in the device pairing list to connect to your device.
2 Resetting the headphones:
Put both Left and Right headphones into the case, then press and hold the pairing button in the
case for B seconds. The headphones will initiate pairing to each other again and the pairing
records on the mobile phone/device will be cleared.
3 OTA Firmware Update: can be done synchronously
and Right earbuds are paired to each other.
Functions Of1 MORE MUSIC APP may vary with different cellphones or operating systems
For more details, please contact Our customer
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do At 1MORE, we value your
satisfaction. If you would like more details on this product or any of our other products,
us online by scanning the QR code Go to Imore com and sign up for VIP, and 1MORE will
treat you like one
Tips
Please read this instruction manual carefully and retain for future reference.
2 Please fully charge the battery before first use
3 If the headphones have been unused for more than g months, we recommend
them. This will improve battery capacity.
4 Only use charging cables and adapters that are FCC (Federal Communications
approved.
5 n dry environments, static electricity may numb your ear. This is not related to the quality of the
product
Safety Information
Never disassemble the headphones. There are no user-serviceable
2 Do not expose the headphones to temperatures
113 OF(45
3 Do not use the headphones in a thunderstorm
working properly, and also increase your chance of being electrically shocked
4 Do not use oil or any volatile liquid to clean this product
5 Do not listen at high volumes for extended periods of time
6 Do not use the headphones in traffic. Do not use the headphones any time it would be dangerous
to be unaware of noises around you
7 Adult supervision is required for children of age 6 and under.
8. If you don't teel comfortable after wearing the headphones,
whether in-ear headphones are suitable for you
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be
disposed of with normal household wastage, it must be collected and disposed of separately
to protect the environment
Your 1MORE retaier will advise you of the correct way ot disposal in your country.
Safety Caution
Do not expose batteries or battery' packs to excessive heat such as sunshine, fire or the like
CE
Declaration of Conformity Hereby, Tiinlab Corporation declares that the radio equipment type
'MORE ColorBuds 2 of ES602 is in compliance with Directive 201 4/53/ELJ. The full text of the
EIJ declaration of conformity is available at the following internet address:www
RF exposure information: The device has been evaluated to meet general RF exposure requirement
The device can be used in portable exposure condition without restriction. Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed.
Declaration for EIJ Compliance
Operation Frequency/Max. EIRP: 2400 2483.5MHz,
ERP is 12dBm.
FCC
The SAR limit of IJSA (FCC) is 1 6 W/kg for head averaged over one gram of tissue
Device types ES602
(FCC D: 2ASDIES602L (Left ear) , 2ASDIES602R
Omm against this SAR limit
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changesto this equipment. Such modifications or changes could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
and can radiate radio frequency energy and, if not installed and used in accordance
instructions, may cause harmful interference to radio communications.
guarantee that interference will not occur in a particular installation. If this equipment
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the fol owing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radiofTV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol owing two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Model: ES602
Headphone Weight (Single):4 9 g
Case Weight: 34 5 g
Product Weight: 44 3 g
Headphone Size: 27 x 21 x 20 mm
Case Size: 60 x 30 x 38 mm
Headphone Battery Capacity (Single):55 mAh
Case Battery Capacity: 410 mAh
Headphone Charging Time: 70 mins
Case Charging Time (withcable):85 mins
Fully Charged Playtime (ANCOn)
Headphone: 6 hours
The specifications are acquired from laboratory tested data
The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary
with different device setting, environments, usage and other factors
Manufacturer: Tiinlab Corporation
Add: No 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan District,
Shenzhen, China
Product information can be found at Imore.com
Silicone Ear Tip
(XS/S/L)
1 MORE
MORE Bear Sticker x 1
power Off: put the headphones back
into the correct slot Of the charging
case and close the lid, they will
automatically turn Offand start
charging
in individual or stereo mode.
The LED light Of the charging case
will indicate different battery statuses
A full charge will take around 70 minutes
The red light on the headphones turning
off indicates the charging is complete
Answer/End call: Double-tap
Voice control on cellphone:
Tap 3 times when Bluetooth
on and no phone calls
Play/Pause: Double-tap
in individual or Stereo mode.
Quick guide to product
SoundlD
2
via the IMORE MUSIC APP while the Left
service.
please visit
that you charge
Commission)
parts inside.
below 32 OF(O 'C) or to temperatures above
storm. This could prevent the headphones trom
please refer to an aurist for advice on
1more.com
Left ear Max. EIRP is 12dBm, Right ear Max
(Right ear) ) has also been tested with
generates uses
with the
However, there is no
does cause
Headphones + Case: 18 hours
Fully Charged Playtime (ANCOff)
Headphone: 8 hours
Headphones + Case: 24 hours
mpedance: 32 Q
Wireless Range: 10 m
Bluetooth:Bluetooth@52
Bluetooth Protocol: HFP I A2DP / AVRCP
Input: IA
Working Temperature:OC - 45 C
Frequency Band: 2 400 GHz - 2 4835 GHz
4,
€4,