RUSTA 864011700201 Gebrauchsanweisung Seite 7

USE
IMPORTANT!
1. Always place the wave iron on its stand on a solid, flat, heat resistant surface as
shown above. The stand will prevent the hot metal parts from touching the surface
and causing damage. Do not place the appliance on any soft or uneven surfaces such
as carpets, bedding or rugs and never cover it. The wave iron reaches a high tempera-
ture quickly. Plug into a suitable mains supply when the appliance is ready for use.
2. Press the On/Off button approx. 2 seconds. The digital display window will flash,
and the wave iron will heat up readily and be ready for use when the digital display
stops flashing.
3. When the wave iron is first switched on, the temperature is always at the default
setting of 100 °C.
4. Select your desired temperature by pressing "
Guidelines for temperatures:
Thin and fine hair: 150 °C
Normal hair: 170 °C
Thick and coarse hair: 180 °C
To prevent damaged hair, we do not recommend using temperatures higher
than 180 °C.
5. During use, the temperature buttons will be locked. To unlock and adjust the tempera-
ture, simply keep pressing "
You can adjust the temperature range in 10 °C increments from 100 °–200 °C.
(100 °C, 110 °C, 120 °C, 130 °C, 140 °C, 150 °C, 160 °C, 170 °C, 180 °C, 190 °C, 200 °C).
The display indicates the selected temperature setting.
Always use a heat protectant spray on your hair to prevent damage.
6. Separate a section of hair approximately 5 cm in width and smooth it out with a brush.
7. Place the chosen section of hair between the clamp of the wave iron and the barrels.
Start from the top close to the roots and clamp the hair, making sure that the hair
is evenly placed inside the barrels. Be careful not to touch the scalp with the tool.
Be careful not to touch the very hot wave iron. We highly recommend using
the provided heat resistant glove, see separate instruction sheet.
8. Hold the wave iron in place until the hair is fully heated, this will be almost instant.
When holding the wave iron always ensure fingertips are placed away from the hot part.
9. For best result, keep the strands of hair smooth whilst you work.
10. After use, press On/Off button for 2 seconds, the digital display will go off, indicating
that the appliance is cooling down.
11. When the wave iron has completely cooled, clean with a clean damp, soft cloth.
Do not use chemical cleaners.
This product reaches high temperatures.
+
"or "-"button 3~4 seconds.
+ -
"or " "buttons.
7