• Do not operate the product outside the
power limits given in the speci cations.
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not attempt to service or repair the
product yourself. Leave any and all
service work to quali ed experts.
• As with all electrical products, this
device should be kept out of the reach
of children.
• Only use the article under moderate
climatic conditions.
• Do not expose the product to any
other moisture than that typical of a
bathroom.
• Never expose the product to direct
contact with water.
5. Setup
• Turn the cover on the back anti-
clockwise and remove it.
• Open the battery compartment and
insert 2 AAA batteries, observing the
correct polarity. Then close the battery
compartment.
• After manually setting the date /
time, replace the cover by turning it
clockwise.
5
6. Operation
Manual setting of the date/time
• Press and hold the SET button to go
to setting mode. Set the following
information in sequence: Year, Month,
Day, Hours, Minutes
• To select the individual values, press the
UP button or the DOWN button and
con rm your selection by pressing the
SET button.
• Press the SET button once to switch
between 12 h and 24 h mode.
7. Installation
• There are 3 options for positioning the
clock: using suction cups, the hanging
eyelet or the base.
• The suction cups can be used on all
glazed surfaces, such as mirrors, glass
or tiles. Dampen the suction cups
before attaching the clock for a better
grip. Ensure that the surface to which
you want to attach the suction cups
is free of dust and grease. Since the
suction cups can loosen after a while,
occasionally push the suction cups
rmly back into place to ensure that the
clock remains secure.
• Place the clock in an area that will
not damage it if it should ever fall
off the wall.
• Using the hanging eyelet on the back,
you can hang the bathroom clock at a
suitable location on a nail or screw.
• You can also place the bathroom clock
on a surface. To do this, push the
supplied base into the hanging eyelet.