Pro-Ject Audio Systems Stereo Box E Bedienungsanleitung Seite 4

Vorschau ausblenden Andere Handbücher für Stereo Box E:

Verfügbare Sprachen

Volume

Adjust the volume to the desired level, using the large knob on the front panel.

Connecting a headphone

Connect the headphones to the ¼" (6,3mm ) jack socket on the front of the unit.

BT connection

The Bluetooth antenna comes pre-mounted on the Stereo Box E.

BT is active only when input 7 is selected. If you want to connect your device the first time activate the pairing

mode by pressing and hold the button

& ready to pair for 60 seconds.

Pairing with Android devices

Open Settings and turn on BT. Start a Scan for BT devices. Searched devices will show up. Tap on "Stereo Box

E" and confirm the connection. When the connection was successful, the LED of Input 7 lights up continuously.

Now you can play music from your Android device over Bluetooth to Stereo Box E.

BT pairing with Apple devices

Tap on Settings and turn on BT. Your device will automatically start searching for available devices. Tap on

"Stereo Box E" and confirm the connection. When the connection was successful, the LED of Input 7 lights up

continuously.

Stereo Box E can store up to 8 BT devices. If the memory is full, new connections will automatically

replace the oldest connection. A new connection is only possible if the LED of BT input is blinking slowly

(it indicates that no device is connected).

Remote control

Replacing batteries

Proceed as follows:

•

Unlock and slide open the battery case cover

•

Replace the battery.

Make sure the battery is the right way round!

Input

(pair) until LED 7 starts blinking. The Stereo Box E is now visible

ON/OFF turns the unit on/off

VOL- turns the volume down

VOL+ turn the volume up

CH- select the input down

CH+ select the input up

MUTE activates and deactivates mute