Pro-Ject Audio Systems Stereo Box E Bedienungsanleitung Seite 3

Phono input
Connect the tonearm signal lead to the In 1 Phono of the amplifier. The earthing wire may be connected to the
screw terminal if you encounter hum problems when using the turntable. The phono input is suitable for MM
and High-Output MC cartridges.
Line inputs
Line level sources (e.g. CD player, radio or TV) can be connected to the RCA input marked In 2 and 3,5mm
TRS input marked In 3.
Digital inputs
Sources with a digital output such as TV satellite/cable receiver or a game console can be connected to the
digital inputs. Coaxial to In 4 and optical to In 5 and In 6.
Sub out
An active subwoofer can be connected to the output sockets marked Sub out.
Connection to the speakers
The output terminals accept loudspeaker cables terminated with 4mm  Banana plugs, spades connectors
or naked wire.
USB 5V/1A output
The USB C output on the back can be used to supply modern streaming devices (for example a Stream Box
S2, or many other manufacturer's devices) with power.
You can use the included USB C to USB A adapter to use USB A power cables that are commonly
included with many products.
Mains power connection
Connect the low voltage plug from the power supply to the Power 20V DC socket of the amplifier before
connecting the power supply to the mains.
Front panel controls
To switch on from standby or to standby
The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the stand-by push button shows that the unit is switched on.
Input selector
Press the push button next to the 7 input LEDs to switch between the inputs. Selected input number will be
illuminated.
© Pro-Ject Audio Systems · Stereo Box E · Revision 31.05.2024
3