Deleting Switching Times; Technical Data - Becker Centronic VarioControl VC320 Betriebsanleitung

Assembly and Operating Instructions
7) Deleting switching times
Note
Both switching times are always deleted in this process.
In order to delete the UP and DOWN switching times, press the STOP button
for 10 seconds.
The shutter will "nod" to confirm.
The switching times have been deleted.
Nominal voltage
Switched current
System of protection
Protection rating
(provided the device has been properly
installed in accordance with the specifications) II
Permissible ambient temperature
Operating frequency
Type of installation
30
Technical data
230240 V AC / 50 Hz
5 A /230240 V AC for cos ϕ =1
IP 42
Between 25 °C and +55 °C
868.3 MHz
In roller shutter box