Smeg KICV60BL Gebrauchsanleitung Seite 7

the hood panel deactivate the
automatic mode of the function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After that
time the system deactivates the
fan automatically and prevents
you from accidental activation
of the fan for the next 30
seconds.
Operating the fan speed manually
FLEXIBLE INDUCTION COOKING AREA
You can also operate the function
manually. To do that touch
hob is active. This deactivates automatic
WARNING! Refer to Safety
operation of the function and allows you to chapters.
change the fan speed manually. When
Flexi4Zone function
you press you raise the fan speed by
one. When you reach an intensive level
The flexible induction cooking area
and press again you will set fan speed
consists of four sections. The sections can
to 0 which deactivates the hood fan. To
be combined into two cooking zones with
start the fan again with fan speed 1 touch
different size, or into one large cooking
.
To activate automatic operation
of the function, deactivate the
hob and activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
area. You choose the combination of the
sections by choosing the mode applicable
to the size of the cookware you want to
use. There are three modes: Standard
(activated automatically when you activate
when the
area. You choose the combination of the
sections by choosing the mode applicable
to the size of the cookware you want to
use. There are three modes: Standard
(activated automatically when you activate
the hob), Big Bridge and Max Bridge.
To set the heat setting use two
left side control bars.
7