Outer Driveline & Suspension Upgrade Kit Installation Instructions
FRONT ASSEMBLY
Steering Links
†
Stampede 96mm
Rustler 78mm
Refer to your model's exploded view
diagrams for help with disassembly.
1. Remove the wheel/tire and wheel hex.
2. Remove the stub axle from the steering block. Retain
and reuse the stub axle.
3. Remove the suspension arm, caster block (c-hub),
and steering block assembly from the front bulkhead.
4. Install the included extreme heavy duty parts and
suspension arms as shown in Fig. 1.
5. Repeat steps 1-4 for the other side.
*Reuse parts and hardware in these locations.
REAR ASSEMBLY
Fig. 2
2579*
3x15mm BCS
Refer to your model's exploded view
diagrams for help with disassembly.
1. Remove the wheel/tire and wheel hex.
2. Remove the suspension arm and axle carrier.
3. Remove the driveshaft assembly from the
differential output shaft of the transmission.
4. Install the included extreme heavy duty parts and
suspension arms as shown in Fig. 2.
5. Repeat steps 1-4 for the other side.
*Reuse parts and hardware in these locations.
Traxxas, 6250 Traxxas Way, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
2640*
2579*
3x15mm BCS
1633*
E-Clip
2579*
3x15mm BCS
3631X
3631A
3631G
3631R
3631T
Suspension Arm
6852A
M3/12.5
6852A
Driveshaft Assembly
TR A XX A S. c om
#9180, 9180-RED, 9180-BLUE, 9180-GRN, 9180-GRAY
2754*
3637*
Stub Axle
9136
9136-GRAY
9136-BLUE
9136-GRN
9136-ORNG
9136-RED
Caster Block
9142
26mm
9137
9137-GRAY
9137-BLUE
9142
9137-GRN
26mm
9137-ORNG
9137-RED
Steering Block
2579
3x15mm BCS
9197
2754*
1985
5x8x0.5 PTW
5116A
5x11x4 BB
9142*
46mm
3655R
2583
3655T
3x18mm BCS
3655G
3655L
3655P
Suspension Arm
2745*
3.0mm NL
9197
†
2745*
3.0mm NL
3646
3x15mm FCS
9197
2583
3x18mm BCS
5116A
5x11x4 BB
5116A
5x11x4 BB
1985
5x8x0.5 PTW
Wheel Hex
2579
3x15mm BCS
3647*
4.0mm NL
Installation Locations
9150
9150-GRAY
9150-BLUE
9150-GRN
9150-ORNG
9150-RED
Axle Carrier
5116A
5x11x4 BB
1654R
Wheel Hex
9142
31mm
Covers parts
Fig. 1
3654*
1985
5x8x0.5 PTW
3647*
4.0 NL
KC23011-R01
240614