DERBEE SKYSCRAPER Anleitung Seite 6

08
Push the wing half with the
wing rod through the wing
opening on the fuselage.
09
Before the wing can be pus-
hed completely into the fuse-
lage, the servo connector of
the wing half must be plug-
ged into the intended posi-
tion on the fuselage. Ensure
that the polarity is correct.
10
When the servo connector is
correctly plugged in, the wing
half can be pushed completely
into the fuselage. Make sure
that the cable is not kinked, so
it is best to turn the aircraft over
and lay the cable neatly.
11
Now the other half of the
wing can be pushed onto
the wing rod and the servo
connector of the wing half
can also be connected to the
fuselage.