Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

wARNING! Risk of injury
Place the cable in such a way that no one trips over it
Q
or steps on it!
wARNING! Risk of material damage
Use the original accessories only.
Q
Never place the device on hot surfaces (e.g. hob plates)
Q
or near heat sources or open fire.
Do not use any harsh or abrasive cleaning agents.
Q
Do not expose the device to temperatures below –10 °C
Q
or above + 40 °C.

4. oPeRATIoN

NoTe: Before using for the first time, switch the device on
for a few minutes and allow it to run at the highest speed
and temperature settings. As a result of the manufacturing
process, a slight odour may be produced. this is not harmful
and only occurs during initial use. Ensure that the room has
good ventilation.
switching on/off and controlling speed
1. Insert the mains plug into an easily accessible socket.
2. the on/off switch and switch for the speed settings allows
you to switch the device on and select the desired speed
for the air flow:
0 = off
= low air flow
= strong air flow
3. After drying, set the on/off switch to 0 (off) and pull out
the mains plug.
28

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Crr move-12

Inhaltsverzeichnis