Additional safety instructions regarding the laser and
batteries
The product implements an invisible laser beam. Please pay
attention to the following:
Do not point the laser at eyes
Do not point the laser at people
Do not look into the laser with optical devices
Remove your finger from the measuring button when you
are not measuring. This will prevent accidental activa-
tion of the laser.
DO NOT disassemble, alter or repair the binoculars your-
self. The laser can be hazardous to your health.
WARNING
This product has been tested to meet the following stan-
dards:
CLASS 1 LASER PRODUCT.
INVISIBLE LASER RADIATION. NEVER LOOK WITH OPTICAL
DEVICES INTO THE LASER. (BINOCULARS, TELESCOPES)
24
24
This device complies with the regulations for laser class 1
in accordance with applicable standards IEC 60825-1:2007
Edition 2 (TÜV SÜD), EN 60825-1:2007 and CE according to
EN 61326-1:2013.
This product complies with the regulations according to the
FDA 21 CFR 1040.10 and 1040.11, and meets the require-
ments of FDA performance standards and the FCC Rules
and Regulations section 15 B:2018 using the test method
ANSIC63.4-2014.
The operation of the device is subject to the following re-
strictions:
(1) This device may not cause harmful interferences, and (2)
this device must allow the reception of any interferences,
including those that may cause undesirable operation.
CR2 lithium battery safety instructions
Make sure that the polarity is correct when inserting the
battery (+/-)
Do not attempt to charge the battery
Do not throw the battery into fire or water
Do not disassemble the battery
When discarding the battery, please observe applicable
laws