elta RHC-3 Bedienungsanleitung Seite 17

covered.
• Only the hairs which meet the blade first are cut.
• Slide the button towards "0N" to turn off the function.
Finish Operation
• Switch off the appliance. "0FF" can be seen on the switch (6).
Cleaning and Maintenance
• Regular cleaning and maintenance ensures optimum results
and long lifetime.
• Turn the unit off and disconnect from mains power supply,
if necessary.
WARNING:
• Do not submerge the unit in water.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
• Remove the attachment comb (1).
Attach/Remove Clipper Head
The clipper head is locked to the casing.
1. Slide the button (2) towards "THIN ".
2. Push back the clipper head with both thumbs to open the
catch.
3. Regularly apply 1 - 2 drops acid-free oil to the clipper head.
4. Replace the clipper head after cleaning first at the bottom
and then at the cutting area.
5. Clean the casing with a slightly damp cloth, if necessary.
6. Replace the attachment comb.