Herunterladen Diese Seite drucken

elta RHC-3 Bedienungsanleitung Seite 15

Netzspannung: 220-240v- 50/60hz, leistung: 3 w

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
4=
.
.
.
24=
Charging the Unit
• Turn the unit off. "0FF" can be seen on the switch (6).
• Connect the power adaptor connector with one of the
following jacks.
• The socket directly at the bottom end of the unit (5).
• Alternatively place the unit in the charging station. The
socket is at the rear.
• Plug the power adaptor into a 230 V/50 Hz wall outlet.
• The indicator light remains red during the charging process.
NOTE:
The charge indicator does not indicate the state of charge of
the rechargeable battery.
• Charge the unit before first use for 6-8 hours.
NOTE:
• After initial use, do not charge the battery for longer than
8 hours at one time.
• If the battery is empty, the appliance can be operated from
the mains. To do so, connect the adapter directly to the
clipper.
CAUTION:
After 6-8 hours always disconnect from mains power supply.
approx. 4 mm
approx. 24 mm

Werbung

loading

Verwandte Produkte für elta RHC-3