Adax VP12 Bedienungsanleitung Seite 7

General overview
Once the heater is powered on, it is ready to be used as a manually operated heater and is set to 22 degrees by default.
Main features
- You can rotate the temperature knob to the desired temperature within a range of 5 to 35 degrees.
- indicator will be activated once the product starts heating. If the product is not heating (idling), there is no indication
- If power outage occurs during operation, once the power is back, product will heat according to the temperature which was set
before the power outage.
No features are available if the product is not connected to the ADAX WiFi application.
Connecting to ADAX WiFi App
ADAX WiFi application is available in the Apple and Google app stores.
In the ADAX WiFi application press "+Add device", and press "Next". Select "Eco BT Bluetooth only heater" icon and follow the
instructions in the application.
Rotate the knob to minimum and maximum positions until the
ready to connect.
Once the product is found, follow the instructions in the application.
Note:
Main ADAX WiFi application function for this heater is to manage schedules. It is not possible to control the product temperature in
the application.
You need to be within Bluetooth range to synchronize schedules and features.
LED indications
- Idle (no indication - until ambient temperature drops).
- Heating (until ambient temperature increases).
- Ready to be connected in the ADAX WiFi application.
- Child lock is activated.
- Factory reset is activated.
Additional functions
Reset the heater to factory default settings
To reset a product to factory settings, rotate the knob to minimum-maximum position until
24-hour protection in case of power outage
The heater will maintain the operation of the internal clock for up to 24 hours in case of power outage. If the power outage lasts for
more than 24 hours, the thermostat will revert to the last used temperature.
Adaptive start (only APP)
This function reaches the temperature set by the user at a specific time. For example, if you want the temperature at 9 o'clock to be
22°C, the heater will determine when it has to start heating so that it reaches 22°C at the desired time.
Function detecting an open window (only APP)
The function of an open window detects if a window is open (i.e., it detects a rapid change in temperature in a short period of time).
After the heater detects an open window, the heating is automatically turned off and changed to anti-freezing mode by maintaining
a temperature of 7°C. After the window is closed, i.e., when the temperature in the area increases, the heater automatically turns
the previous program on or maintains a permanent constant temperature.
Security against unauthorised use by children or other persons (only APP)
The thermostat may be secured against unauthorized use by children or other persons. This function can be turned on/off by using
ADAX WiFi application.
Adax AS, Myresgt. 1 3060 Svelvik, Norway. www.adax.no
Adax BT X.1
indicator starts blinking. This will indicate that the product is
.
indication starts blinking.
Art.no: 62256 Date: 01.10.2023
GB
7