Herunterladen Diese Seite drucken

Kemper 104987E SMART Anleitung Für Die Montage, Betrieb Und Wartung Seite 13

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
9.
Turn anticlockwise all the way the cock until it is positioned on "IGNITION"
where the piezo ignition will ignite the flame.
10. If the stove dose not light, turn the control knob back to "OFF" position and
repeat.
11. If after three failed attempts, the stove dose not light, turn the control knob to
the "OFF position and move the cartridge lever to the "UNLOCK" position.
12. Open the cartridge cover and remove the cartridge, Shake the cartridge to
see if it is empty. If empty, replace the cartridge and repeat from point 9.
13. Regulate the flame according to your needs.
14. Warning: the device is not equipped with a safety system for the automatic
closing gas (thermocouple).
SHUTTING DOWN THE APPLIANCE
1.
To turn off the appliance, rotate clockwise the cock to the "OFF" position and
wait until the flame is fully extinguished before performing the next step.
2.
Position the cartridge-connecting lever on the "UNLOCK" position and
remove the gas cartridge from the compartment.
3.
Wait for the plate to cool before storing it.
4.
When the appliance is not in use, it is mandatory to remove cartridge
out of the appliance.
5.
This unit can be kept inside only if the cartridge has been disconnected and
removed from the appliance. If you expect that the barbeque remains unused
for a certain period of time, store it in its original packaging and in an
environment free from dust.
CHANGING THE CARTRIDGE
1.
Check that burners are extinguished before disconnecting the gas cartridge. Be careful the gas cartridge
could be hot.
2.
Ensure that the cartridge is empty before replacing it (shake it in order to hear the sound produced by the liquid).
3.
Replace the cartridge outside and away from other people.
4.
Make sure that the cock of the hot plate is CLOSED: cock on "OFF" position (clockwise rotation).
5.
Check that the cartridge connection lever is on the "UNLOCK" position.
6.
Open the cartridge holder lid and take out the cartridge.
7.
Check that the seals are in a good state of maintenance.
Put the cartridge in its housing placing the cut on the cartridge's neck in correspondence to the safety stop.
8.
9.
Position the connecting lever on the "LOCK" position.
CLEANING AND MAINTENANCE
Clean your equipment after EVERY USE. Do not use abrasive or flammable detergents, which may damage the
components of the unit and may cause a fire. Clean with a solution of warm water and soap.
NEVER USE THE PRODUCTS FOR OVEN CLEANING. CAUTION: All cleaning and maintenance operations,
should be made when the unit is cold and after removing the cartridge.
MAINTENANCE – REPAIR
All questions of the departments services must be formulated to: KEMPER – Via Prampolini 1/Q – Lemignano
di Collecchio (PR) – Italy – Tel. +39 0521 957111 – Fax +39 0521 957195 – www.kempergroup.it– info@kempergroup.it
There are some residual risks after the installation of the appliance that have to be considered:
Residual risks according to Regulation (EU) 2016/426 (annex 1, point 1.2):
Although the appliance is designed with all the possible safety requirements, in case of external fire there is the
possibility that the internal pressure and temperature of the appliance and of the cylinder will increase in a dangerous
and uncontrollable way; in that case use the extinguishing tools suitable for that conditions and get away safely.
The use of incorrect cartridges and / or cartridges filled with gas other than the one indicated can produce high values
of carbon monoxide, dangerous for health. It is recommended to use the appliance only with Kemper butane gas
cartridges art. 577.
This appliance can produce carbon monoxide that has no odor. Inhalation of carbon monoxide, odourless and clear
gas, can cause flu-like symptoms, sickness illness and possibly death if produced inside aforesaid areas through use
of the product without proper ventilation.
The use of two or more burners in series or located near flammable substances may cause a risk of fire. Therefore, it's
recommended to not put beside the burners and keep them away from flammable substances or from any objects be
affected by heat
At the end of use, always unlock the cartridge and don't leave the hot pan on the stove. A hot pan can overheat the
cartridge. RISK OF EXPLOSION.
The appliance does not have a flame supervision device. Do not leave the appliance unattended during use. RISK OF
FIRE.
DT Istr 104987E_01/24
RESIDUAL RISKS
13/72

Werbung

loading