digi-tech 5-WD0433LD1 Bedienungs- Und Sicherheitshinweise Seite 14

Insert a 1.5 V AA LR6 / R6P battery in the correct
polarity according to the marking in the battery
compartment (10).
Close the battery compartment (10) and tighten the screw (8)
again.
Setting the time
 Turn the time setting dial (9) counterclockwise to set the
time.
Alarm
Alarm setting
 Turn the alarm setting wheel (11) counterclockwise to
set the small alarm hand (3) to the desired alarm time.
Activate or deactivate the alarm
 Set the ALARM ON / OFF switch (12) to ON, the alarm is
switched on and will sound at the set time.
 Set the ALARM ON/OFF switch (12) to OFF and the alarm is
switched off.
If you do not deactivate the alarm, it will sound again after 12
hours.
Light
Press the dial cover to briefly turn on the backlight.
Cleaning instructions
Improper cleaning can damage the device. DO NOT immerse the
device in water or other liquids. Do not use aggressive cleaning
- 12 -