TFA_No. 30.5021 Anleitung.bel
STYLE
– Digital Thermo-Hygrometer
Positioning and mounting
• With the removable leg the instrument can be placed onto any flat surface
or wall mounted at the desired location by the wall mounting hole at the
back of the unit.
Battery replacement
• Change the battery CR 2032 button cell when the battery symbol appears
on the display
• Observe correct polarity (+ pole above).
• Low batteries should be changed soon to avoid the damage resulting from
a leaking battery. Batteries contain harmful acids. Wear protective glasses
and gloves when handling with leaked batteries.
Attention:
Please do not dispose of old electronic devices and empty batteries in
household waste. To protect the environment, take them to your retail
store or to appropriate collection sites according to national or local regu-
lations.
Maintenance
• Keep the instrument in a dry place.
• Do not expose the instrument to extreme temperatures, vibration or
shock.
• Clean it with a soft damp cloth. Do not use solvents or scouring agents.
• If the unit does not work properly, change the battery.
12
17.06.2010
10:57 Uhr
Seite 12
STYLE
– Digitale thermo-hygrometer
Behuizing
D: Wandophanging
E: Standaard (wegneembaar)
F: Batterijvak
Inbedrijfstelling
• Verwijder de standaard, door hem voorzichtig omlaag te trekken.
• Open het batterijvak door het deksel met behulp van een muntstuk tegen
de wijzers van de klok te draaien. Verwijder de isolatiestrook van de
batterij.
• Sluit het batterijvak weer.
• Alle LCD-schermsegmenten verschijnen.
• Het apparaat is nu bedrijfsgereed.
• De bovenste display geeft u de tijd en de behaaglijkheidgraad, de middelste
display de actuele temperatuur en onderste display de luchtvochtigheid
aan.
Manuele tijdsinstelling
• Na het inzetten van de batterij of het indrukken van de SET toets ge-
durende 3 seconden kunt u de tijd instellen.
• De uurweergave begint te knipperen.
• Druk op de SWITCH toets, en u kunt het uur instellen.
• Druk nogmaals op de SET toets en stel op dezelfde manier de minuten in.
• Als u de toets ingedrukt houdt wordt de waarde sneller verhoogd.
• Bevestig met de SET toets om de instelling te bevestigen.
25